CVE-2026-89865In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE
(256-byte) bounce buffer obtained from dma_pool_alloc(), which does not
zero the allocation. They initialize only a few leading bytes before
handing the buffer to qla2x00_write_sfp().
qla2x00_write_sfp() can override the transfer length with a user-supplied
value:
if (len == 1)
opt |= BIT_0;
if (opt & BIT_0)
len = *sfp;
*sfp is the first byte of the (user-controlled) payload, so len can grow
up to 255. The device then DMA-reads len bytes from the 256-byte pool
buffer. Since only a small prefix was written
(e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU
status register), the hardware reads past the initialized region and
writes up to ~219 bytes of stale DMA-pool heap memory to the device
flash.
Allocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers
so any bytes beyond the initialized data are zero rather than stale heap
contents.